PoE Partner Training Guide - Link
** Do NOT remove the Desiccant packet that is zip tied inside the dome, that stays to help absorb any moisture. **
Extra tips for proper dome mount:
** Do NOT remove the Desiccant packet that is zip tied inside the dome, that stays to help absorb any moisture. **
- Make sure this rubber strip seal is in it's groove with no kinks and lays flat with no debris.
- Once you close the lid make sure you tighten these three screws do NOT over tighten though.
- On the bottom on the camera, where the screws go in there are 3 little holes that function as a drain, before the rubber seal around the edge to help keep moisture and condensation away from the camera. Make sure there are no debris in the lid before closing.
