Skip to content
Submit A Request
  • There are no suggestions because the search field is empty.

Replacement Wireless Camera Installation Instructions

It's easy! Just use the app and it'll walk you through each step. 

  1. From your, Deep Sentinel App select the Settings icon, located on the lower right corner of the Home screen
  2. From the Settings screen, select Device Manager then select the Camera that you are going to replace
  3. From the Device Manager screen, select + Add a new device
  4. Follow the instructions on the app
    • The Hub will start blinking white indicating Pairing Mode
    • The camera will start flashing white and say "Pairing," indicating Pairing Mode
    • If successful the white ring will go solid for 2 seconds and the camera will say "Connected"