Skip to content
  • There are no suggestions because the search field is empty.

Reserve Camera IP Addresses (recommended setup)

The router steers traffic to all the devices on the local network including the PoE Hub, NVR, and the Cameras. If the router resets, either because of a technical issue or a loss of power, then the IP addresses of the local network can be renewed. When this occurs, it can mean the Camera IP addresses are changed and need to be remapped to the NVR.

To prevent this from happening, Deep Sentinel recommends reserving the IP addresses. This is achieved by changes in the firmware of the router that is assigning the addresses. Changes to firmware settings can be made by logging into the router via a web browser or if the router has an app you may be able to access it through this also.

The exact steps vary between router manufacturers so consult the support documentation that is specific to your make and model. Below are instructions for some of the more common brands. NOTE: You may need to disable DHCP IP reservations if this is a separate setting on your router.

Before starting, make sure that you know the IP address of each camera. You can get this information from the Router firmware or a computer on the local network.

Eero Routers

In the Eero app, go to Network Settings / Advanced settings / Reservations and Port Forwarding / Add a reservation. Select the Camera and either give it a new IP or keep it at the current one. Click Save. If you change the IP, then restart the camera and it'll come back with the newly reserved IP address

TP-Link Wireless Routers

Use a web browser from a computer or mobile device on the local network to access the settings.ClickDHCP->Address Reservationon the left side and clickAdd Newbutton. Enter the MAC address and IP address of the Camera and check thatenabledis selected. PressSave.

Orbi

Use a web browser from a computer or mobile device on the local network to access the settings. Select advanced / Setup / LAN Setup.In the Address Reservation section of the page, click the Add button. In the IP Address field, type the IP address to assign to the computer or server. The page adjusts. Enter an IP address.

Google Wifi

In the Google Home app, tap WiFi / Settings/ Advanced Networking. Tap DHCP IP reservations / Add IP reservations. Tap the device (Camera) for which you want to assign a static address. Enter an address and then press save.